Extractor Arm
Self-Balanced Extractor Arm
for Fumekiller/DustBag
for Fumekiller/DustBag
The Extractor Arm is a device which allows the user to position a suction hood to capture fumes or dust close the generation
spot with complete ease and flexibility
Features
This highly useful
accessory may be used with the
® ® Fumekiller and DustBag units .
Maintenance and running costs are
low as all components are built for
continous , reliable , safe and efficient
use.These systems contribute to a
safer , healthier work environment
where toxic airborne pollutants are
removed. We provide excellent
factory support and product
expertise based on years of industrial
process emission control.
Re-usable
Safe & Secure
Low Maintenance
Eco Friendly
Factory Support
Applications
The Extractor Arm consists of 2 ducts made of aluminium or stainless steel,
connected by PVC flexible hoses and mounted on interconnected support rods
with friction-loaded pivots. A suction hood is attached to one end. The other end is
attached to a rotating hollow cylinder. The suction hood, ducts, hose and rotating
cylinder form a passage for the fumes or dust. The entire arm is self balanced and
articulated at 3 points. This allows the suction hood to be positioned by hand at any
point with a reach of 2 meters (or 4 meters) to & fro and 2 meters ( or 4 meters) up &
down with complete ease & flexibility with minimum effort. The Extractor Arm can be
® ® fitted to most of our Fumekiller models & Dustbag models. The arm can also be
fitted to overhead ducting to provide suction points close to the floor level for the
capture of fumes or dust from pollution generation spots.
How it Works
The Extractor Arm consists of elements of aluminium ducts joined
by flexible hose, articulated at 3 fulcrum points. One end of the arm is fitted with a
swivel fixture. The arm is self balanced using friction pads and a telescopic gas tube.
The arm can be swivelled by hand through about 270 degrees and can be
positioned easily within a nominal distance specified for each arm. With the Extractor
® ® Arm, fitted to the Fumekiller or DustBag the suction hood of the arm is to be
positioned close to the fumes/dust generation spot. The fumes/dust will be sucked
® ® through the suction hood and will reach the Fumekiller or DustBag for further
filtration
| Technical Specifications* | ||||||
|---|---|---|---|---|---|---|
| Models | FEA-200-2 | FEA-200-3 | FEA-200-4 | FEA-250-2 | FEA-250-3 | Mini Arm |
| Air Flow Capacity | 2000-2500 Cu mtrs/hr | 2000-2500 Cu mtrs/hr | 2000-2500 Cu mtrs/hr | 3500-4000 Cu mtrs/hr | 3500-4000 Cu mtrs/hr | 250Cu mtrs/h |
| Total reach (Approx.) | 2 mtrs up, down 2 mtrs to, fro | 3 mtrs up, down 3 mtrs to, fro | 4 mtrs up, down 4 mtrs to, fro | 2 mtrs up, down 2 mtrs to, fro | 2 mtrs up, down 2 mtrs to, fro | 0.75 mtrs. 250 degree swivel |
| Construction | Aluminium ducts 200Ø x2 nos. | Aluminium ducts 200Ø x2 nos. | Aluminium ducts 200Ø x2 nos. | Aluminium ducts 200Ø x2 nos. | Aluminium ducts 200Ø x2 nos. | Segmented PVC suctions press fitted together to form duct |
| Interconnecting flexible PVC Hose. | Interconnecting flexible PVC Hose. | Interconnecting flexible PVC Hose. | Interconnecting flexible PVC Hose. | Interconnecting flexible PVC Hose. | Swivel approx: 250 degree | |
| Telescopic gas tube damper | Telescopic gas tube damper | Telescopic gas tube damper | Telescopic gas tube damper | Telescopic gas tube damper | Held in position due to light weight of the duct sections and friction of joints | |
| Friction pads with disc spring for all pivots | Friction pads with disc spring for all pivots | Friction pads with disc spring for all pivots | Friction pads with disc spring for all pivots | Friction pads with disc spring for all pivots | ||
| MS suction hood with handle | MS suction hood with handle | MS suction hood with handle | MS suction hood with handle | MS suction hood with handle | PVC suction hood | |
* Due to continuous innovation, specifications are subject to change without notice.
Related Products
